Features
Easy-start
- This Sonicare model comes with the Easy-start
feature activated, which helps you get used to
brushing with the Sonicare.
- The brushing power gently increases to full power
over the first 12 brushings.
- The Easy-start feature is active if you hear 2
beeps immediately after you switch on the
Sonicare. Once the Sonicare has reached optimal
brushing power (after the 12th brushing), you no
longer hear the 2 beeps at the beginning of each
brushing cycle.
Note: Each of the first 12 brushings must be at least
1 minute long to move properly through the Easy-start
ramp-up cycle.
To deactivate or activate the Easy-start feature:
1
Attach the brush head to the handle.
2
Place the handle in the plugged-in charger.
3
To deactivate the Easy-start feature, press and
hold the on/off button for 5 seconds. You hear
1 beep to indicate that the Easy-start feature
has been deactivated.
4
To activate the Easy-start feature, press and
hold the on/off button for 5 seconds. You hear
2 beeps to indicate that the Easy-start feature
has been activated.
Use of the Easy-start feature beyond the initial
ramp-up period is not recommended and reduces
EnglisH
11