Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
B The non-woven cloth of the filter cartridge has turned rust brown or
dark grey.
Look through the viewing window in the cap of the filter cartridge holder
to see the colour of the non-woven cloth.
C The volume of purified water decreases substantially.
d The filtered water still has an unpleasant smell after purification.
2
To replace the filter cartridge, close the tap and set the water
selection lever to the unfiltered stream position. (Fig. 22)
3
Tilt the filter cartridge holder 90° backwards and pull it off the
water purifier housing. (Fig. 27)
4
Unscrew the cap of the filter cartridge holder (Fig. 28).
When you remove the cap of the filter cartridge holder, water leaks
from the water inlet of the holder.
5
Remove the filter cartridge from the holder. (Fig. 29)
6
Put a new filter cartridge in the holder (Fig. 30).
7
Screw the cap back onto the filter cartridge holder (Fig. 31).
8
Tilt the filter cartridge holder 90° backwards and insert it into the
water purifier housing (Fig. 23).
9
Pull the cartridge holder upwards until it is in upright
position. (Fig. 24)
10
Write down the date on which you have to replace the filter
cartridge on the replacement reminder sticker.
Note: The filter cartridge holder and the cap can be purchased as service
parts.
replacement reminder sticker
-
We advise you to replace the filter cartridge every 6 months, for
optimum performance. Please register your product online at http://
www.philips.com/welcome for more information on filter cartridge
replacement.
English
13
Publicidad
Tabla de contenido
