Product Specifications - Philips WP3861/00 Manual De Instrucciones

Question
Why is the water
flow weak at
the unfiltered
setting?
Why is the water
flow is weak at the
filtered setting?

Product specifications

Product name and
type number
Type
Major filter
components
Initial water flow rate
Chlorine reduction
capacity
Filter lifetime
Replacement filter
cartridge
Answer
Perhaps the stainless steel screen under the
rubber washer inside the water purifier housing
is clogged. Clean it with a toothbrush and rinse
it.
Perhaps the filter cartridge is clogged. Replace
the filter cartridge.
Perhaps the tap water pressure is lower than
specified.
WP3861 Philips Pure Taste
Direct tap mount
Silver-coated granular activated carbon
2ltrs/min. (water pressure at 1kgf/cm² (10
metres of water column/ 100kPa), water
temperature at 20°C)
WP3961-2,500ltrs (water density at 2ppm)
Approximately 6 months at 10ltrs a day (the
actual lifetime depends on the quality of the
local water and the water pressure)
WP3961
English
15