Connections - Steren WR-057 Manual De Instrucciones

4. At the transmitter, remove the battery
compartment.
5. Place one 9V battery being careful with
the polarity.
6. Replace the cover.

5. CONNECTIONS

2. Connect the AC power adapter to the
receiver's DC IN connector, then plug the
adapter into a compatible AC electrical outlet.
3. Connect the receiver to a sound system,
mixer or amplifier's microphone input(s)
with ¼" output jacks. When using a mixer,
connect each mic line into a separate
channel. This gives you complete control
when mixing the vocals.
1. Connect a microphone to transmitter input (tie or head
microphone)
DC IN
AUX
12-15 VDC
UTPUT
400mA
FREQUENCY:
ANT -B AUX DC IN A: 254.60MHz ANT -A
OUTPUT 12-15 VDC 227.70MHz
400mA B:
WR-057
1 2
AC 12V R L R L R L
GND
MIXER
SPEAKER
POWER
ADAPTER
13