Dash Disassembly - Metra 95-6523 Manual De Instrucciones

With radio delete or Single DIN
factory radio:
1. Using Metra's 86-5618 radio
removal tools pull the factory radio
from the dash.
2. Remove (2) Phillips screws in
bottom of dash opening.
3. Unclip and remove the factory
radio trim panel.
With Double Din factory radio:
1. Using Metra's 86-3528 radio
removal tools pull the factory radio
from the dash.
2. Remove (2) Phillips screws from
the bottom of the dash opening.

Dash Disassembly

(Figure A)
95-6523
2