AquaSource 67534-1208D2 Manual De Instrucciones página 6

OPERATING INSTRUCTIONS
1. After the installation is complete:
a. Remove the aerator on the faucet (A).
b. Turn on the water supply and allow
both hot and cold water to run for at
least one minute each.
c. While the water is running, check for
leaks.
d. Replace the aerator.
2. If it is necessary to remove the quick connector
(1), squeeze the tabs (2) on the quick connector
and then pull down to disconnect.
1
2
Squeeze
6
A
2
1
Pull
down
1
Lowes.com