Dometic FreshWell 3000 Manual De Instrucciones página 9

Dometic FreshWell3000
Note on installation location
• To install the machine it is necessary to create openings in the floor. These open-
ings must be accessible and must not be covered by any parts of the vehicle.
• Before installing the under-bench air conditioner, check whether any vehicle
components could be damaged by the installation of the under-bench air
conditioner (such as lamps, cupboards, doors).
• Make sure no combustible objects are stored or installed near the air outlet. A
distance of at least 50 cm should be kept.
• The inclination of the installation surface may not exceed 10°.
• For safety reasons, note the location of existing wiring harnesses, wires and other
components within the installation area, in particular those which are not visible,
when installing the under-bench air conditioner (when drilling or screwing etc.).
• To obtain the optimal air-conditioning in the vehicle, install the under-bench air
conditioner in a central position, in a compartment or a similar housing.
• Choose a place that is easily accessible for servicing as well as disassembling and
installing.
• Place the assembly template into the chosen compartment and check the space
available for the openings in the floor.
• To minimize the transmission of noise and vibration during operation, the under-
bench air conditioner should have a all around minimum clearance of 30 mm to
walls and furniture.
• The under-bench air conditioner must be installed on the floor.
• Keep a distance of 200 mm between the front of the under-bench air conditioner
and the walls of the compartment to facilitate filter replacement.
• Installing the under-bench air conditioner into an external compartment (e.g.
false bottoms), the air to be treated must be drawn in from the vehicle's
passenger compartment.
• Suctioning of outside air can significantly reduce the power of the system.
EN
Installation
7