Maxon MAX SOL Instrucciones página 14

LIFT CORPORATION Sht. 14 of 30 DSG#
NOTE: Do the following procedure to verify correct operation of the solar power charg-
ing system.
12. Ensure solar modules are fully ex-
posed to sunlight. Verify controller
charging status displayed by the LED
indicators on the charge controller
(FIG. 14-1 or FIG. 14-2). See
TABLE 14-1.
LED INDICATOR
PV
Battery
Charge LED green/Battery LED orange, both
fl ashing
© MAXON Lift Corp. 2020
Draft 12/21/2020
VERIFY CORRECT OPERATION
TS-30 CHARGE
CONTROLLER
COLOR STATUS
ON Solid
OFF
Green
Slow fl ash
Fast fl ash
ON Solid
Green
Slow fl ash
Fast fl ash
Orange ON Solid
ON Solid
Red
Fast fl ash
TABLE 14-1
M-20-17
TS-15 CHARGE
CONTROLLER
CHARGING STATUS
LED INDICATOR
TS-15 LED LIGHT INDICATORS
FIG. 14-1
CHARGING STATUS
LED INDICATOR
TS-30 LED LIGHT INDICATORS
FIG. 14-2
CONDITION
Low voltage, no charging
No voltage, or poor connection
Charging
Over voltage
Normal
Full charge
Over voltage
Under voltage
Discharged/low temperature
Overheating
System voltage error
Rev. - Date: 12/09/20
BATTERY STATUS
LED INDICATOR
BATTERY STATUS
LED INDICATOR