Using Eco Showering Mode - Kohler K-683 Guia Del Usuario

Using Eco Showering Mode

If you have a saved Eco user preset:
Path: [User Icon] > select saved Eco preset
Press the [User Icon] once, twice, or three times (dependant on your save preset number) to select a
saved Eco preset.
When eco showering is enabled, "Eco Purge" is automatically activated. All the water outlets (with the
exception of any handshowers) will turn on and remain on until the water reaches the set temperature
displayed.
Once the set temperature is reached, the shower will pause turning off all the water outlets. An audible tone
will sound prior to the shower pausing.
NOTE: Once the shower is paused, either by the user or after Eco Purge has completed, the shower will
remain paused for 95 seconds before turning off the system.
Press the [OK Icon] to begin your saved showering experience.
The countdown sequence for your timed shower begins when the shower is resumed. The countdown timer
is displayed in the bottom right corner of the screen.
The shower can be paused at any time by pressing the [OK Icon]. Showering is resumed by pressing the [OK
Icon] again.
A tone will sound when there is two minutes remaining, at one minute remaining, and again when your
shower is complete.
Once the countdown is complete, the shower will turn off.
See the "Eco H2O" section for more information on this feature and saving Eco user presets.
If you have Eco H2O activated:
Path: Shower Screen > [OK Icon]
Kohler Co. 9 1043184-5-E