Operating Without The Dial Ring; Using Your Shower - Kohler K-683 Guia Del Usuario

Portrait Interface

Operating without the Dial Ring

If your dial ring is lost or misplaced, you can still use your interface by activating the alternate scroll mode.
NOTE: When the alternate scroll is activated, the user presets will not be available.
When on the main "Shower" or "Settings" screen, the alternate scroll mode can be activated by pressing and
holding the [Back Icon] for 8 seconds.
For Portrait Interfaces: Once activated, the [123 User Icon] will allow you to scroll down and the [456 User
Icon] will allow you to scroll up. Press the [OK Icon] to select the highlighted option.
For Landscape Interfaces: Once activated, the [123 User Icon] will allow you to scroll up and the [456 User
Icon] will allow you to scroll down. Press the [OK Icon] to select the highlighted option.
To deactivate the alternate scroll mode, press and hold the [Back Icon] for 8 seconds or replace and turn the
dial ring. Once a dial ring is detected, the alternate scroll mode will automatically deactivate.

Using Your Shower

IMPORTANT! The interface must be set up according to your chosen valve configurations before
proceeding. If the configuration has not yet been selected in your interface, refer to the "Set the Valve
Configuration - Preset Options" or "Set the Valve Configuration - Custom Options" section.
To begin using your shower, use the dial to scroll to the shower screen and press the [OK Icon]. If
your user presets are already set, refer to the "Using User Presets" section.
At any time, the shower can be turned off by pressing the [Power Icon].
The water will turn on and you will see a temperature screen displaying the current temperature and the set
temperature.
If you have the auto purge function activated:
All the water outlets (with the exception of any handshowers) will turn on and remain on until the water
reaches the set temperature displayed. (See the "Auto Purge" section for instructions to turn this feature on
or off.)
Once the set temperature is reached, the shower will turn off all water outlets except the one designated as
primary. The primary is the water outlet designated for regular showering. (See the "Select Primary Water
Outlet" section for more information on selecting or changing your primary water outlet.)
If the auto purge function is not activated:
The primary water outlet, usually a single showerhead, will turn on. (See the "Select Primary Water Outlet"
section for more information on selecting or changing your primary water outlet.)
If you have Eco H2O activated:
Kohler Co.
Landscape Interface
7 1043184-5-E