cecotec TOTAL IRON 10100 PRO Manual De Instrucciones página 29

Ocultar thumbs Ver también para TOTAL IRON 10100 PRO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Using the garment steamer
The garment steamer enables you to remove creases with
only a few strokes. It is easy to use, safe for all garments and a
great solution for delicate fabrics like silk.
- Switch on the garment steamer by pressing the garment
steamer power-on button on the panel.
- The on light indicator will turn on red when heating, and
then will turn blue to indicate that the garment steamer
is ready for use.
- Press the steam button to start steaming.
Autocleaning
Warning: The appliance cannot be used during the Autocleaning process, do not interrupt it.
Note: The Autocleaning process is automatically activated after 2 litres of water have been
used.
1.
During the Autocleaning process, the cleaning light indicator on the panel will turn on red.
This process will last approximately 3 minutes. The device might emit some noises during
the process due to the inner process.
2.
After approximately 3 minutes, rinsing water will flow into the dirty water tank.
3.
Pull out the dirty water tank and empty it.
4.
Slide the dirty water tank back into the appliance.
Auto-off
This appliance is equipped with an automatic shut-off function. When the steam trigger is not
used for more than 15 minutes approx., the appliance automatically shuts off and switches to
the standby mode.
ENGLISH
TOTAL I RO N 1 01 00 P RO
29

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido