Preface; Safety; Technical Specifications - Nederman 591 Serie Manual De Usuario

1

Preface

Read this manual carefully before installation, use and service of this product.
Replace the manual immediately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products including documentation.
This product is designed to meet the requirements of relevant EC directives. To
maintain this status, all installation, maintenance and repair is to be done by
qualified personnel using only Nederman original spare parts and accessories.
Contact the nearest authorized distributor or Nederman for advice on
technical service and obtaining spare parts. If there are any damaged or
missing parts when the product is delivered, notify the carrier and the local
Nederman representative immediately.
2

Safety

This document contains important information that is presented either as a
warning, caution or note. See the following examples:
WARNING! Risk of personal injury.
Warnings indicate a potential hazard to the health and safety of personnel,
and how that hazard may be avoided.
CAUTION! Risk of equipment damage.
Cautions indicate a potential hazard to the product but not to personnel, and
how that hazard may be avoided.
NOTE! Notes contain other information that is important for personnel.
3

Technical specifications

Table 3-1: Technical data
Item
Primary voltage
Line fuse (primary)
Secondary voltage
Phase
Frequency
Transformer
Welding current
Delay time*
Connection diameter
* from completion of welding to closing the damper
Dimension
110-120 V / 220-240 V
max. 10 A
24 V
1~
50/60 Hz
30 VA
8-400 A
0-5 min. ± 25 % (1 minute at
delivery )
Ø125, 160 or 200 mm
Motor Damper EN
9