Reattaching The Refrigerator Doors - Samsung RF263BEAE Serie Manual Del Usuario

4. Lift the door straight up to remove.
5. Remove the screw (
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
( 9 ) attached to the lower left and right door
hinges with an allen wrench. Remove the lower
left and right door hinges ( 10 ).
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its fi nal location, assemble parts in
reverse order.
1. The Water Line must be fully Inserted to the
center of transparent coupler to prevent water
leakage from the dispenser.
2. Insert
the clip in the install pack and check that it
holds the line fi rmly.
DA68-02615A(0.0).indb 11 DA68-02615A(0.0).indb 11
8 ) attached to the
10
8
9
Allen wrench Allen wrench
Center of transparent Center of transparent
coupler coupler
clip A clip A
(6.35 mm) (6.35 mm)
DISASSEMBLE THE FLEX DOOR
1. Take out the upper drawer by lifting it up.
2. Take out the lower basket (
basket up from the rail system.
3. Press the fi xing hook of rail system.
4. After holding and pulling out the top of Freezer
Door, remove it at the rail system.
Make sure there is no scratch at the end of
Sliding Rail by being dented from the fl oor.
CAUTION
1 ) by lifting the
1
setting up _11
2012.7.11 8:41:9 PM 2012.7.11 8:41:9 PM