Televes Avant 3 Manual De Instrucciones página 20

User manual
Programmable analogue/digital amplifying
headend for use in single-family or multi-
family homes, characterised by: easy insta-
llation, simple programming, automatic
equalization (AGC), external programmer,
low consumption powering.
It disposes of 2 UHF programmable inputs
with 5 filters (F1, ..., F5).
It is possible to select the number of filters
per UHF input (5-0 y 2-3), and this will be
done depending on the channels that are
received by each of the antennas.
UHF1
U1: 5
U2: 0
F1 F2 F3 F4 F5
UHF1 UHF2
U1: 2
U2: 3
F1 F2 F3 F4 F5
In any filter, you can select any channel from
21 to 69 with a bandwidth from 1 to 5 chan-
nels among channels C21-C30 and with a
bandwidth from 1 to 7 channels among
channels C31-C69.
F1 F2 F3 F4
max. 7CH
UHF2
These inputs dispose of an automatic powe-
ring system that it switch off by overload.
The unit has a mixing output for the UHF
input channels, and this can be used to
increase the number of available filters by
adding new Avant3 units to the installation.
The signal that is available in this output
depends on the configuration of the chosen
inputs.
Inputs configuration 5-0:
UHF
Inputs configuration 2-3:
20 20
Avant 3
UHF1 UHF2 UHF
(UHF1)
(5-0)
F1 F2 F3 F4 F5
UHF1 UHF2 UHF
(UHF2)
(2-3)
F1 F2 F3 F4 F5