Preparing Before Installing Wall-Mount; Wall Mount Kit Specifications (Vesa) - Samsung 8 Serie Manual Del Usuario

Preparing before installing Wall-Mount

Case A. Installing the SAMSUNG Wall-Mount
To install a wall-mount, use the Wall mount adapter 1.

Wall Mount Kit Specifications (VESA)

The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the
✎
floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or
slanted wall, it may fall and result in severe personal injury.
NOTE
✎
− Standard dimensions for wall mount kits are shown in the table below.
− When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are
provided.
− Do not use screws that do not comply with the VESA standard screw specifications.
− Do not use screws that are longer than the standard dimension or do not comply with the VESA standard
screw specifications. Screws that are too long may cause damage to the inside of the TV set.
− For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
− Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
− Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
− Do not mount the TV at more than a 15 degree tilt.
Product
Family
40 - 46
LED-TV
55 - 75
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
[UF8000-XC]BN68-04794A-05L04.indb 20
1
Inch VESA Spec.(A * B)
200 X 200
400 X 400
Case B. Installing another company's Wall-Mount
Standard Screw Quantity
M8 4
English - 20
1
15.6 mm
2013-10-29 9:41:39