Samsung 8 Serie Manual Del Usuario página 23

Installing the TV-Holder
1. Screw the provided wall mount adapters on the
back of the TV.
3. Tighten the TV-holders on the wall mount adapters,
as shown by the illustration.
5. If you fasten the Holder to a wall, attach it as described in Step 4. Make sure to centre the Holder cord and stretch
it tight. Also, attach the Holder so that the cord is level with the ground or slanted downwards from the wall.
When attaching the holder to a wall, use an anchor compatible with the wall's material. If you can, drive the
✎
screw into a stud (Recommended).
Install the TV close to the wall so that it does not fall.
✎
When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted downwards for
✎
safety purposes.
Check the cord occasionally to make sure it is secure.
✎
Before moving the TV, separate the connected cord first.
✎
6. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If
you have any doubt about the security of your connections, contact a professional installer.
If a television is not installed in a stable location, it can fall and cause serious injuries. To prevent injuries, particularly to children, take
these simple precautions:
• Use cabinets or stands recommended by the manufacturer of the television.
• Only use furniture that can safely support the television.
• Ensure the television is not overhanging the edge of the supporting furniture.
• Do not place the television on tall pieces of furniture (for example, cupboards or bookcases) without anchoring both the furniture
and the television to a suitable support.
• Do not rest the television on a piece of cloth or or similar material placed between the television and the supporting furniture.
• Educate children about the dangers of climbing on furniture to reach the television or its controls.
[UF8000-XC]BN68-04794A-05L04.indb 23
2. Insert the screw into the centre of the TV-holder, as
shown by the illustration.
Fastening direction
4. Fasten the Holder to the cabinet using a wood screw.
Use an M5 x L35 or a larger screw.
✎
Ensure that the Holder cord is in the middle of the
✎
TV Holder and that the Holder cord is stretched
tight.
IMPORTANT INFORMATION
English - 23
Holder
Protrusion
Anchor
2013-10-29 9:41:41