ENGLISH
14
35_020_9715_2_DFU-Luxury_A6_v1.indd 14
Sanitizing (select models)
- With the UV sanitizer you can clean your brush
head after every use.
Unplug the sanitizer, discontinue use and
call Consumer Care if:
- The UV light bulb remains on when the door is
open.
- The window is broken or missing from the
sanitizer.
- The sanitizer gives off smoke or a burning smell
while it is operating.
Note: UV light can be harmful to the human eye and
skin. This device should be kept out of reach of children
at all times.
1
After brushing, rinse the brush head for
15 seconds and shake off excess water.
Do not place the travel cap on the brush head
during sanitization.
2
Let the brush head to dry in open air for
2 minutes.
3
Place your finger in the door recess on top of
the sanitizer and pull open the door.
4
Place the brush head on one of the 2 pegs in
the sanitizer with the bristles facing the light
bulb.
Note: Only clean Sonicare snap-on brush heads in the
sanitizer.
Note: Do not clean Sonicare for Kids brush heads in
the sanitizer.
5
Make sure the sanitizer is plugged into an
electrical outlet.
02/12/15 15:34