Beyerdynamic IMPACTO ESSENTIAL Manual página 6

6
Connection and button functions
Illustration 1-2
Cable to connect to the
right side of the headphone
Skip to the previous track
Hi-Res LED (illuminates only
with Hi-Res audio transmission
from 48 kHz)
Operating instructions
• Disconnect the original cables on the right and left ear cup of your headphone.
• Connect the two mini jack plugs (3.5 mm) of the headphone cable, which is attached to the Impacto
essential, to the ear cups of your headphone. Refer also to illustration 1-2.
• Connect the Impacto essential to your computer, tablet or smartphone by using the appropriate
cable. Make sure that you connect the connector indicating "DAC" to the bottom of the Impacto
essential (refer to illustration 1-3).
• The Impacto essential is ready for operation when the
• Set the volume of your player to maximum. After that you will control the volume on the Impacto
essential only.
• In order to protect your hearing, the
increased further while pressing the + button. If you wish to increase the volume any further, release
the + button briefly (approx. 1 second) and press the + button again (as long as the
flashes). Please also refer to the note on the European standard EN 50332 at the beginning of this
manual as well as the section "Warning / hearing protection".
Impacto essential – High-end cable DAC & Amplifier
Reduce volume
button flashes from a certain gain and the volume is not
Cable to connect to the
left side of the headphone
Increase volume
Play / Pause
Skip to the next track
button is illuminated.
button still