Beyerdynamic IMPACTO ESSENTIAL Manual página 8

8
Charging
• You can charge the battery pack by inserting
one of the cables supplied into any live USB
port (e.g. USB charger).
• You must remove the battery pack from the
Impacto essential in order to charge it.
• Connect one end of the charging cable to the
battery pack (see Illustration 1-5) and the
other end of the charging cable to the USB
port.
• The LED on the battery pack (see Illustration
1-6) displays the current charging status:
LED is red Battery pack is charging
LED is white Battery pack is fully charged
LED is not Battery pack is not charging
illuminated
Information on battery life for Li-ion batteries
• High temperatures, particularly in association
with a high charging status, result in irrevers-
ible damage.
• If you are not intending to use the battery for
an extended period or are planning to put
it into storage, it is advisable to lower the
battery's charging level to around 40 to 60 per
cent and to store it at temperatures of between
0 and 15 °C.
Care
• Only use a soft, dry cloth or a cloth that has
been slightly moistened with water to clean
the Impacto.
• Never use cleaning agents that contain solvents,
as these damage the surface.
Impacto essential – High-end cable DAC & Amplifier
Illustration 1-5
micro-USB port
for charging the battery pack
Illustration 1-6