Safety Precautions - Yamaha YVC-1000MS Guia De Inicio Rapido

1 Please ensure to immediately remove the power plug from the
outlet in any of the following cases.
Failure to observe this may result in fire or an electric shock.
Please ensure to request the dealer concerned to carry out any
necessary repairs or inspections.
• Any abnormal odor or noise occurs;
• Smoke is emitted;
• The product is broken; or
• The product has been exposed to water.
2 Ensure not to damage the power cable. Failure to observe this
could result in fire, electric shock, or damage to the product.
• Ensure not to place any heavy objects on the cable.
• Ensure not to process the cable in any way.
• Ensure not use any staples to fix the cable in place.
• Ensure not to apply excessive force to the cable.
• Ensure to keep the cable away from anything hot.
3 Ensure to only use the included power cable. Failure to observe
this could result in fire, electric shock, or damage to the product.
4 Ensure to only use the specified power supply voltage. Failure to
observe this could result in fire, electric shock, or damage to the
product.
5 Connect the power plug to an outlet that you can see and reach in
thereby ensuring that you can easily remove it if the necessity
arises.
6 Ensure to fully and securely insert the power plug into the outlet.
Being insufficiently inserted could result in an electric shock. It
could also lead to dust accumulating on the plug, which could then
result in heat or fire.
7 Verify that the current capacity of the outlet or a power strip in
thereby ensuring that use of the product does not exceed it. Any
overheating or degradation of the power strip could result in fire.
8 Do not touch the terminals with your fingers or metal objects.
Failure to observe this may result in electric shock or damage to
the product.
9 Ensure the product does not fall or strongly impacted. The internal
parts could break, which could then result in electric shock, fire, or
damage to the product.
10 If the product has been damaged, request repair or inspection
services from a dealer.
Continued use of the product may result in fire or electric shock.
11 Do not disassemble or alter this product in any way.
Failure to observe this could result in fire, electric shock, or
damage to the product.
12 Do not obstruct heat dissipation.
– Do not place a cloth, tablecloth or other such object over the
product.
– Do not place the product on top of a rug, carpet, etc.
– Do not wedge or squeeze the product into a narrow space that
has poor air circulation.
– Do not block the ventilation holes.
Allow ventilation space of at least 1 cm on the top, 1 cm on the left
and right, and 5 cm on the back of this product.
Failure to observe the above may result in heat being trapped
inside the product and cause a fire or damage to the product.
13 Do not place the product outdoors or in a location where water
may drip on it.
Failure to observe this may result in fire, electric shock or damage
to the product.

Safety Precautions

14 Do not install the product anywhere it will be exposed to dust or
humidity, oily smoke or steam, or corrosive gas. Failure to observe
this could result in fire, electric shock, or damage to the product.
15 Ensure that the product is on the level.
Do not place it upside down or in a vertical orientation. Failure to
observe this may result in fire, electric shock or damage to the
product.
16 Avoid installing the product where foreign object may fall onto the
product and/or the product may be exposed to liquid dripping or
splashing. On the top of the product, do not place:
• Other components, as they may cause damage and/or
• Burning objects (i.e. candles), as they may cause fire, damage to
• Containers with liquid in them, as they may fall and liquid may
17 Do not insert foreign objects such as metal or paper in the product.
Failure to observe this may result in fire, electric shock or damage
to the product.
18 If thunder is heard, avoid touching the product.
Failure to observe this may result in electric shock.
19 Periodically remove any dirt and dust from the power plug. Failure
to observe this could result in fire.
20 The product should be used at least 22 cm away from persons
using a pacemaker, defibrillator, or similar device.
Failure to observe this may affect the pacemaker, resulting in a
serious accident.
21 Do not use this product near medical equipment. Radio waves
from this product may adversely affect the operation of electro-
medical equipment. Do not use this product in locations where use
of radio waves is restricted, such as near medical equipment.
22 Avoid damaging the USB and microphone cables.
• Do not place heavy objects on cables.
• Do not modify cables.
• Do not affix cables using staples.
• Do not apply unnecessary force to cables.
• Do not place cables near heat sources.
Doing so may result in fire, electric shock or damage to the
product.
23 Be sure to use the USB and microphone cables that come with the
product.
Using other USB or microphone cables may result in fire, electric
shock, or damage to the product.
24 When this product is not used for a long period of time, be sure to
unplug all power plugs.
Failure to observe this may result in fire or electric shock.
25 Ensure your hands are dry when connecting or disconnecting the
power plug or cables.
Failure to observe this may result in electric shock or damage to
the product.
26 Ensure not to install the product anywhere unstable or where it will
be exposed to vibrations as it could fall over or turn upside down,
thus resulting in injury or damage to the product.
27 Ensure not to install the product anywhere it will be exposed to
direct sunlight or extraordinarily high temperatures (near a heater,
etc.). Failure to observe this could result in damage to the product.
28 Do not sit/stand on the product or place other objects on top of it.
Failure to observe this may result in damage to the product.
YVC-1000MS Quick Start Guide
discoloration on the surface of the product.
the product, and/or personal injury.
cause electrical shock to the user and/or damage to the product.
3