Auto Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV's position can be easily adjusted.
TV Rear Panel
EX-LINK Cable (Not supplied)
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
T he Wall Mount Adjustment screen is displayed.
I f the Wall Mount Adjustment screen is not displayed when clicking on a direction
button while watching your TV, use the menu to display that screen.
•
P ress the MENU butt on to display the menu. Press the ▲ or ▼ button to select
"Setup", then press the ENTER button.
•
P ress the ▲ or ▼ button to select "Wall-Mount Adjustment", then press the
ENTER button.
Remembering the Position
2. Adjust to the desired position using the ▲,▼,◄,► buttons.
I f you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
P ress the INFO button to reset. Press the ◄ or ► button to select "Yes", then
press the ENTER button.
The position is initialized to the default setting.
. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
T o not save the current position, press the RETURN button.
W hen selecting a save mode, you cannot use the Color buttons.
4. Press the ENTER button to save.
W hen Position1 is selected, the message "Current position saved as Position1" is
displayed.
5. Press the ENTER button.
T he saved position appears on the left side of the OSD.
Moving to the remembered position
1. Complete Step 1 of "Entering the menu".
2. P ressing a Color (Red, Green, Yellow) button moves the auto wall mount to the
saved position.
Y ou can move the wall mount to one of the 3 pre-set positions by pressing the
Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
I f you adjust the positon after moving to a pre-set position, the position display will
disappear.
For installation, refer to the Installation Manual provided with the wall mount.
F or product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company.
T his installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please
contact your nearest dealer.
The auto wall mount will not work when Anynet + is operating.
Auto Wall-Mount
English - 85
(LN-T4081F, LN-T4681F, LN-T5281F)
TV
▲ More
HDMI Black Level
Film Mode
Wall-Mount Adjustment
PIP
Function Help
SW Upgrade
Wall-Mount Adjusment
Adjust
Select a mode to Save.
Adjust
Wall-Mount Adjusment
Position1
Adjust
Setup
►
: Low
►
: Off
►
►
►
: On
►
Move
Enter
Return
Position
1
2
Save
Center
INFO
Save
Position1
Position2
Position
Enter
Return
Position
1
2
Save
Center
INFO