Installing Windows - ASROCK H61M-DG3/USB3 Manual De Instrucciones

2.7 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.8

Installing Windows

XP / XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATA2 HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.8.1 Installing Windows
Functions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATA2 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE].
STEP 2: Install Windows
2.8.2 Installing Windows
Without RAID Functions
If you want to install Windows
/ SATA2 HDDs without RAID functions, please follow below steps.
Using SATA / SATA2 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE].
STEP 2: Install Windows
system.
22
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit OS on your SATA / SATA2 HDDs
Advanced screen
®
XP / XP 64-bit OS on your system.
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
Advanced screen
® TM
7 / 7 64-bit / Vista
ASRock H61M-DG3/USB3 Motherboard
TM TM
/ Vista 64-bit /
TM TM
/ Vista 64-bit / XP / XP 64-
Storage Confi guration.
TM TM
/ Vista 64-bit
TM TM
/ Vista 64-bit OS on your SATA
Storage Confi guration.
TM
/ Vista 64-bit OS on your