Connecting The 200W Power Inverter - Generac 006180-0 El Manual Del Propietario

CONNECTING THE INVERTER USING THE VEHICLE POWER CORD
Read and follow all the Safety Rules before connecting the power inverter. The vehicle power
cord is included with the 200 and 400W models and can be used for outputs up to 80W.
2 - Connect the black
negative (-) ring
terminal to the power
inverter negative (-)
DC terminal post.
3 - Plugs into the vehicle
accessory outlet.
5 - Confirm the LED indicator is green.
6 - Turn off the appliance to be powered.
7 - Plug in and turn on the appliance.
8 - Plug in other appliances following steps
6 & 7, if desired. NOTE: Do not exceed
rated power of the power inverter.
1 - Connect the red positive (+)
ring terminal to the power inverter
positive (+) DC terminal post.
4 - Turn the power
inverter on.
Operation
Replaceable Fuse
(Replace only with
similar type fuse,
8 amp, type 3AG,
time lag/slow blow.
11