Descargar Imprimir esta página
Ocultar thumbs Ver también para HW-J6000R:

Publicidad

Idiomas disponibles

Idiomas disponibles

If there is more than one file on the device you are playing, and you press
Press to select TREBLE, BASS, SUBWOOFER LEVEL, AUDIO SYNC,
Then, use the ,  buttons to adjust the TREBLE or BASS volume from
-6 ~ +6, SUBWOOFER LEVEL volume from -12, -6 ~ +6.
Press and hold the SOUND CONTROL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz,
5KHz and 10KHz are selectable and each can be adjusted to a setting between
If the Soundbar is connected to a digital TV and the video appears out of sync
with the audio, press the SOUND CONTROL button to sync the audio with the
video. Use the ,  buttons to set the audio delay between
0 ms ~ 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync function
To turn on or off of the rear speaker sound, select REAR SPEAKER in Sound
Control, and then adjust the volume between OFF-RS and ON-RS by using the
To control the volume of the rear level sound, select REAR LEVEL in Sound
Control, and then adjust the volume between RS -6~+6 by using the ,  buttons.
● The REAR SPEAKER and the REAR LEVEL mode are only available when you connect the SWA-8000S
(sold separately).
- If the SWA-8000S is disconnected, REAR SPEAKER and REAR LEVEL remain displayed but the
functions are not available.
● Operate the TV using the TV's remote control.
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
Press the p button to pause a file temporarily.
Press the p button again to play the selected file.
the [ button, the previous file is selected.
REAR SPEAKER, or REAR LEVEL.
9
Power
Volume
Play / Pause
Skip Back

SOUND CONTROL

-6 ~ +6.
may not available.
,  buttons.
DESCRIPTIONS

Publicidad

Capítulos

Solución de problemas

loading

Este manual también es adecuado para:

Hw-j6001r