Schrack BZ327900 Instrucciones De Empleo página 14

1 5. Error message
When working with the taxxi, it can happen that en error message appears
in the display.
• Er 2 = Time switch not recognised (name of the application is not correct)
• Er 1 = Data not correctly transferred. Repeat the transfer.
• Er 0 = Batteries not supplying sufficient voltage
6. Changing the batteries
• Undo the screws
• Replace the batteries
• 2 x type LR 6 alkaline AA (1.5 volt)
• Close the taxxi again
GB