Schrack BZ327900 Instrucciones De Empleo página 9

1. General
You can use the taxxi to transmit and receive switching programs (data).
You compile the switching programs:
• on a PC (laptop) with the software „talento dialog"
(see separate manual)
• in the normal way, at the time switch
(series talento plus 471/2, 671,891/2 and 991/2,
see the operating instructions for the time switches)
You can transfer the relevant switching program exclusively to the time switch (type)
for which the switching program was complied.
The taxxi has 4 program locations.
You can transfer 4 different switching programs of read out switching programs.
Memory locations empty
Write memory locations
GB
= P 1, P 2, P 3, P 4
= P _ 1, P _ 2, P _ 3, P _ 4