Sub Function; Plasma Purification(Optional); Auto Clean (Optional) - LG PQWRCQ0FDB Manual De Instalación Y Del Propietario

Sub function

Plasma Purification(Optional)

PLASMA Purification only

Auto Clean (Optional)

This function operate when the unit is turned off.
1 Press the FUNCTION SETTING button 1 time.
Auto Clean symbol will blink.
2 Press the SET/CLEAR button to reserve or cancel the Auto Clean function.
If the Auto Clean function is reserved, whenever the unit is turned off, the indoor fan is
still running for about 30 minutes internally without cooling or dehumidification operation.
Also the louver is closed.
This dries up any remains of moisture & cleans the unit internally.
1
Press the ON/OFF button.
The unit will respond with beep sound.
2 Press the PLASMA button. Plasma Purification will
start when the button is pressed and stop when the
button is pressed again.
If you press the PLASMA button, Plasma Purification operates.
• Plasma filter is a technology developed by LG to get rid of
microscopic contaminants in the intake air generating a
plasma of high charge electrons. This plasma kills and
destroys the contaminants completely to provide clean and
hygienic air.
• This function can be used in any operation mode and any fan
speed can be used while plasma filter is functioning.
Owner's & Installation Manual 19
Sub function