Owner's Instruction
Owner's Instruction
Cooling Mode - Standard Operation
Cooling Mode - Power Cooling
10 Wireless Remote Controller
1
Press the ON/OFF button.
The unit will respond with beep sound.
Press MODE button to select Cooling Mode.
2
3
Set the desired temperature by pressing TEMP button.
Press ROOM TEMPERATURE CHECKING button to
check the room temperature. When setting the desired
temperature is higher than room temperature, cooling
wind isn't blow out.
❈ Setting Temp. Range : 18~30°C(64~86°F)
1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press MODE button to select Cooling Mode.
Press the JET COOL button. The unit will operate in super
3
high fan speed in cooling mode.
❈ Wall mounted models operate power cooling mode for
30 minutes.
To cancel the Power cooling Mode press the Jet Cool button or the fan button
4
or the room temperature setting button again and the unit will operate in high
fan speed in cooling mode.
or
To raise the temperature
To lower the temperature
or