Changing The Input Source - Samsung 5 Serie Manual Del Usuario

Source List
¦
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB
satellite receiver connected to the TV.
■ TV / Ext. / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB / AllShare
✎
In the Source List, connected inputs will be highlighted.
✎
If you want to see connected devices only, move to Connected using ◄ or ► button.
✎
Ext. and PC always stay activated.
✎
If the connected external devices are not highlighted, press the red button. The TV will
search for connected devices.
Edit Name
¦
How to use Edit Name
In the Source, press the TOOLS
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices /
TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection
easier.
✎
When connecting a PC to the
Name.
✎
When connecting a PC to the
under Edit Name.
✎
When connecting an AV devices to the
Devices mode under Edit Name.
Information
You can see detailed information about the selected external device.
Using the "CI or CI+ CARD"
To watch paid channels, the "CI or CI+ CARD" must be inserted.
y If you do not insert the "CI or CI+ CARD," some channels will display
the message "Scrambled Signal".
y The pairing information containing a telephone number, the "CI or
CI+ CARD" ID the Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact
your service provider.
y When the configuration of channel information has finished, the
message "Updating Completed" is displayed, indicating the channel
list is updated.
✎
NOTE
x
You must obtain a "CI or CI+ CARD" from a local cable service provider.
x
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+ CARD" may
cause damage to it.
x
Insert the "CI or CI+ CARD" in the direction marked on the card.
x
The location of the
COMMON INTERFACE
x
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
Insert the "CI or CI+ CARD" that supports the current antenna settings. The screen will be distorted or will not be seen.

Changing the Input Source

button, and then you can set an external input sources name you want.
HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit
port with HDMI to DVI cable, you should set the TV to DVI PC mode
HDMI IN 1(DVI)
HDMI IN 1(DVI)
Connecting to a COMMON INTERFACE slot
slot may be different depending on the model.
English - 10
port with HDMI to DVI cable, you should set the TV to DVI