Identification; Ordering Information; Scope Of Delivery; Wiring - Endress+Hauser COM280 Manual Del Usuario

Medidor del oxígeno disuelto
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

COM280
10

Identification

10.1 Ordering information

COM280 oxygen handheld instrument
Order No.: 51510540

10.2 Scope of delivery

The scope of delivery consists of:
• 1 COM280 handheld instrument
• 1 COS280 membrane-covered oxygen sensor with integrated temperature sensor NTC 30,
calibration and storage vessel and basket protector, 3 m (9.8 ft) fixed cable and waterproof
DIN connector
• 1 plastic bottle with alkali electrolyte solution, 50 ml (1.7 fl.oz.)
• 1 plastic bottle with cleaning solution, 50 ml (1.7 fl.oz.)
• 1 plastic beaker, 50 ml (1.7 fl.oz.)
• 1 replacement membrane
• 1 polishing foil
• 1 support unit as electrode holder
• 4 alkali-manganese batteries, 1.5 V
• 1 sturdy PP plastic case with integrated measuring station and separate compartment for
sensor and accessories
• 1 set of Operating Instructions BA348C/07/b4
If you have any questions, please contact your supplier or your local sales center.
11

Wiring

11.1 Inserting the batteries

1.
Release the four screws on the housing base and remove the top.
2.
Insert the batteries. Make sure the polarity is correct (see Fig.).
3.
Fit the top and tighten the four screws of the housing base.
!
Note!
Only use leak-proof alkali-manganese batteries (Mignon AA type).
Endress+Hauser
Identification
21

Publicidad

Tabla de contenido
loading

Tabla de contenido