How To Install The Product; Mount The Base Unit - Axis T99A Guia De Instalacion

AXIS T99A Positioning Unit

How to install the product

DANGER
Risk of electric shock. All cables shall be de-energized before installing the product.
CAUTION
• Risk of injury. The product has moving parts and may move unexpectedly when power is
supplied. Always disconnect the power supply before installing or performing maintenance
on the product and keep at a safe distance when it is powered.
• The electrical connections and conduit installations shall be made by a certified electrician
and in compliance with local regulations.

Mount the base unit

1
Pan/tilt unit
2
Base unit
1. Unscrew the four base screws (T30).
2. Simultaneously pull and turn the base unit counterclockwise until the arrows on the
base unit and the pan/tilt unit are aligned.
14