Axis T99A Guia De Instalacion página 17

1
Power cable (not included)
2
Strain relief
3
Grounding Screw
4
Grounding braid (not included)
5
Bottom cable hole
1. Install the optional conduit adapters (not included). For more information on available
conduit adapters, see www.axis.com.
2. Connect the grounding braid to the grounding screw.
3. Insert the power cable through the hole in the base unit as shown in the illustration
above. Alternatively insert it through the bottom cable hole.
4. Insert the power cable through the strain relief with a distance of 530 mm (21 in) from
the strain relief to the end of the cable.
5. Close, and tighten the strain relief.
AXIS T99A Positioning Unit
17