Technical Data - Monti MBX Bristle Blaster Electric 3200X Manual De Instrucciones

® ®
MBX Bristle Blaster Electric 3200X
Operating instructions
GB
6.

Technical data

Function description
Handle
Rear housing
Safety feature
Fan
Switch
® ®
MBX Bristle Blaster belt
Accelerator bar
On Off
Technical data
®
Model: MBX
Blaster 3200X (A) • Volt/ Ampere: 240 V / 2.0A • (A) 120 V / 4.0A
®
-1
No-load speed: 3200 min • Net weight: 2.3 kg • Colour of the ring: orange
Noise/vibration information
The A-weighted noise level of the tool is typically:
sound pressure level 82 dB (A); sound power level 93 dB (A). Wear hearing protection!
The typical weighted acceleration is 2.8 m/sec².
Warning: The two carbon brushes must be replaced together. To reduce the risk of injuries, electrical shocks and
damage to the tool, it is important that you never submerge the tool in liquid, and that liquid can never enter the tool
from the outside.
Volt AC Ampère Double insulated housing RoHS
Double insulated housing
® ®
The MBX Bristle Blaster 3200X has a double insulated housing. Double insulated housings are manufactured with
two separate layers of protection for the electrical insulation or have twice the width insulation between the user and
®
®
the electrical tool. The MBX Bristle Blaster 3200X, which is equipped with this insulation system, does not need
an earthed electrical cable or to be plugged into an earthed socket. For this reason this tool is equipped with a plug
that makes it possible to use extension cables that do not need to be earthed. However the double insulation does
not replace the usual safety regulations that must be followed on the usage of this tool. This insulation is intended to
provide additional protection to protect you from injuries in case of possible electrical damage inside the tool.
For more information please contact info@processaids.in or visit www.processaids.in
20