Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN Powered Bluetooth speaker
Package content
• PS404 speaker
• User manual
• AC/DC power adapter
• Audio cable
• Remote control
Technical specifications
Input: DC 15 V, 3 A from AC/DC adapter
Output power: 30 W
Frequency response: 20–20 000 Hz
s/n ratio: > 40 dB
Battery parameters: Valve-regulated lead-acid (VRLA) battery,
12 V, 4.5 Ah
Battery charging time: 3–6 hours
Battery life: Up to 12 hours
Dimensions: 525 x 360 x 210 mm
Front panel
1
2
3
4
5
MIC VOLUME
MASTER VOLUME
AUX
IN
Micro SD
MIN
MAX
MIN
INPUT
EQ
11
10
9
8
7
6
1. Microphone volume
2. USB port (USB flash drives of up to 32 GB, FAT32 format)
3. Micro SD card slot (cards of up to 32 GB, FAT 32 format)
4. Auxiliary input
5. Master volume
6. Equalizer button
7. Repeat mode button
8. Next track button
9. Play/Pause button/Radio auto preset
10. Previous track button
11. Input button
Connecting via Bluetooth (pairing)
•
Select Bluetooth mode by pressing the Input button (No. 11)
on the front panel or the Mode button (No. 4) on the remote
control. A voice prompt will be heard.
•
Enable Bluetooth functionality on your device (smartphone,
tablet or laptop computer).
•
Now search for the PS404 Bluetooth speaker and press "OK"
The default pin code, if asked for, is 0000 (four zeros).
2
Back panel
MIC
1
GUITAR
2
TREBLE
POWER
DC
BATTER Y
3
15 V
OFF
GUITAR
BATTERY FULL
4
CHARGING
BATTERY LO W
MAX
1. Microphone input socket (mono TS 1/4")
2. Guitar input socket (stereo TRS 1/4")
3. Power switch
4. Battery level indicator
5. Bass knob
6. Treble knob
7. Microphone echo knob
8. Guitar volume knob
9. DC input socket
Playing audio files from a UsB device or micro sD card
Select USB/micro SD mode by pressing the Input button (No. 11) on the front panel or the Mode button (No.
4) on the remote control. A voice prompt will be heard when USB/micro SD input is selected.
* The audio formats that can be played back on this system are MP3 and WAV.
Playing audio from an auxiliary input
•
Select Auxiliary mode by pressing the Input button (No. 11) on the front panel or the mode button (No. 4)
on the remote control. A voice prompt will be heard when Auxiliary input is selected.
•
Connect the cable with the 3.5 mm stereo plug to the AUX IN socket on the front panel.
•
Connect the cable with the 3.5 mm stereo plug to the music player.
Volume level adjustment
•
Volume level of this speaker can be adjusted in two ways: using an analogue volume adjustment knob on
the speaker or via digital sound level adjustment using the included remote control.
•
Some mobile Bluetooth devices will adjust digital volume level of the speaker automatically without
remote control
STANDBY
1
5
BASS
MODE
5
6
PREV
NEXT
FOLDER
6
MIC
7
EQ
ECHO
8
8
VOL
INPUT
DC 15 V, 3A
9
1. Mute button
2. ON/OFF button
3. Number pad
4. Mode button
5. Playback options
6. Change track button
7. Volume increase/decrease button
8. Play/Pause button
9. Equalizer preset button
the need of the remote control, while other mobile devices require separate volume
adjustment on both devices.
•
To achieve maximum loudness of the speaker, both digital and analogue volume levels
must be set to their highest positions. The highest volume level of digital adjustment will
be indicated as U15 on the display of the speaker.
2
•
If an audio signal and volume levels are too high, the playback of sound can become
distorted. This is not an indication of a defective device.
Guitar input
3
•
Plug your guitar cable into the GUITAR socket (Socket No. 2 on the back panel).
•
Set the MASTER VOLUME control to zero.
•
Turn the speaker ON using the ON/OFF switch.
4
•
Gradually turn the MASTER VOLUME up to your desired level.
* Use a good-quality screened/shielded guitar cable to help prevent noise interference.
microphone input
7
•
Plug your microphone cable into the MIC socket (Socket No. 1 on the back panel).
•
Set the MIC VOLUME control to zero.
9
•
Turn the speaker ON using the ON/OFF switch.
•
Gradually turn the MIC VOLUME up to your desired volume level.
* Use a good-quality screened/shielded microphone cable to help prevent noise interference.
Presetting radio stations
Press the Play/Pause button (No. 9) on the front panel for automatic radio station presenting
or the Play/Pause button (No. 8) on the remote control. Radio stations in range will be stored
in the memory.
Battery care
•
Before using the device, make sure the battery is fully charged.
•
Charge after each use.
•
Make sure the battery is fully charged before storing the device.
•
Please ensure the battery is fully charged at least once per month.
•
Avoid full discharges as it will cause permanent damage to the battery.
•
Rechargeable batteries exhibit a gradual decrease in performance over their service life,
so a reduction in the initial battery capacity and playback time is not an indication of a
faulty battery or device.
Important safety Precautions
•
For the best results, place your speaker on a solid, flat surface when in use.
•
Do not touch the metallic parts of your connector cables.
•
In order to avoid electric shocks and other such accidents, do not dismantle or take apart
the speaker.
•
Do not expose your speaker to excessive amounts of heat or cold. Keep it in a well-
ventilated area to prevent it from overheating.
•
Turn off your speaker when you are not using it.
•
Do not spill liquids or fluids on your speaker.
•
When connecting an audio device to your speaker, make sure the volume on the audio
device is not set too high, in order to avoid excessive signal input.
•
This speaker should not be placed near open flames, such as lit candles.
.
Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product may not be treated as household waste. By
ensuring this product is disposed of correctly, you will help protect the environment. For more detailed
information about the recycling of this product, please contact your local authority, your household
waste disposal service provider or the shop where you purchased the product.
User manUal
Publicidad
Tabla de contenido
