En Bluetooth Speaker - ACME PS101 Manual De Instrucciones

EN Bluetooth speaker

Package content
1. PS101 Bluetooth Speaker
2. Micro USB Charging Cable
3. 3.5 mm Audio Cable
4. User Manual
Technical specifications
Type: portable Bluetooth
Bluetooth version: v4.1
Frequency response: 20-20 000 Hz
Power output: 3 W
Impedance: 4 Ω
Driver size: 1.5"
Connections: AUX/Bluetooth/micro SD
Battery: Li-ion, 3.7 V, 1200 mAh
Working distance: up to 10 m
Dimensions: 91 (H) x 104 (W) x 40 (D) mm
Key identification
1. – : Vol-/Prev Music. Short press to decrease the volume,
long press for changing to the previous music.
2. + : Vol+/Next Music. Short press to increase the
volume, long press for changing to the next music.
3. : Pause/Play/Disconnect Bluetooth. Short press to
play and to pause, long press for disconnecting the
Bluetooth.
4. : Turn On/Off
On OFF
Bluetooth mode
1. "Power On" the unit, and the white colored LED on
the top of speaker will flash quickly meaning that the
speaker is in the Bluetooth pairing mode.
2. You can then search for the Bluetooth device "PS101"
on your cell phone or other devices, and you will hear
indication sound when the unit is paired successfully
with your mobile device.
3. Short Press the key to pause or play music. Long
press to disconnect the Bluetooth.
4. Long press the –/+ key for the next/previous track
selection.
5. Short press the –/+ key for the volume increase/
decrease.
Hands-free mode
In Bluetooth mode, the speaker will beep when a call is
received. You can press the
up the call directly, and press this key again to hang up.
key on the speaker to pick
To reject a call, quickly press
line-in (aUX) mode
"Power On" the unit, then use a 3.5mm audio cable to connect your phone or
other devices with the "PS101", and the LED on this speaker will become red
to indicate that the speaker has switched to the AUX mode. You can then play
music via your phone or computer.
Playback from the micro sD card mode
"Power On" the unit, then insert the micro SD card into the speaker slot, and
the LED on this speaker will become red to indicate that the speaker has
switched to the SD card mode.
Charging
The unit has a built-in a rechargeable battery, so before playing the speaker,
please first follow the steps below to charge the unit.
1. Plug the supplied USB cable into the speaker's USB socket and the other
end into a computer's USB port or a USB charger.
2. During the charging, the red colored LED indicator on the back side will turn
on. When the speaker is fully charged, the red indicator will turn off.
Important safety Precautions
• For the best results, place your speaker on a solid, flat surface when in use.
• Do not touch the metallic parts of your connector cables.
• In order to avoid electric shocks and other such accidents, do not dismantle
or take apart the speaker.
• Do not expose your speaker to excessive amounts of heat or cold. Keep it in
a well-ventilated area to prevent it from overheating.
• Turn off your speaker when you are not using it.
• Do not spill liquids or fluids on your speaker.
• When connecting an audio device to your speaker, make sure the volume
on the audio device is not set too high, in order to avoid excessive signal
input.
• This speaker should not be placed near open flames, such as lit candles.
Waste electrical and electronic equipment (Weee) symbol
The use of the WEEE symbol indicates that this product may not be
treated as household waste. By ensuring this product is disposed
of correctly, you will help protect the environment. For more
detailed information about the recycling of this product, please
contact your local authority, your household waste disposal service provider
or the shop where you purchased the product.
User manUal
twice.