Product Overview Chapter Chapter:ProductOvervew Introduction Thank you for choosing the Linksys Power Over Ethernet Adapter Kit, comprised of the Injector and Splitter. The Injector sends power and data over the Ethernet cable to the Splitter. Then the Splitter separates the data and power back into two cables and delivers them to the remotely located access point or other network device that requires a five-volt power input.
Product Overview Chapter Power The Power port is where you will connect the included adapter. Ethernet IN The Injector has a built-in Ethernet network cable. You will connect this cable to one of the Ethernet network ports on your router or switch. Injector’s LED The Power LED is located on the top of the Injector.
Página 7
Product Overview Chapter Splitter’s First Side Panel The Power & Data IN port is located on the Injector’s first side panel. Power&DataIN This port allows you to connect the Splitter to the Injector. (You will use the included Ethernet network cable to make this connection.) Splitter’s Second Side Panel The built-in Ethernet network and Power cables are located on the...
Página 8
Product Overview Chapter Splitter’s LED The Splitter’s LED is located on the top of the Splitter. Power (Green) The Power LED lights up when the Splitter is powered on and ready for use. PowerOverEthernetAdapterKt...
Connection Chapter Chapter:Connecton Overview This chapter gives instructions on how to connect the Power Over Ethernet Kit. Once connected, the Kit will transmit data and power over the Ethernet network cable to your remotely located network device. The diagram shows an example of how the Kit can be connected to a wired switch and a wireless access point.
Connection Chapter Power on a Device that Uses a Standard Power Adapter Use the Injector and Splitter to power up a device that uses a standard power adapter. Follow these instructions: Connect the Injector’s built-in Ethernet network cable to your router, switch, or other network device.
Connection Chapter NOTE: If the plug of the Splitter’s Power cord does not fit into your network device, then use the included barrel jack adapter. Plug the Splitter’s Power cord into the jack end, and plug the other end of the barrel jack adapter into the Power port of your network device.
Página 12
Connection Chapter Then connect the other end to the Ethernet port of your remotely located access point or other network device. NOTE: If the plug of the Splitter’s Power cord does not fit into your network device, then use the included barrel jack adapter.
Specifications AppendxA AppendxA:Specfcatons Model WAPPOE Standards IEEE 802.3, 802.3u Ports Injector: Power, Data and Power OUT Splitter: Data and Power IN Cabling Type Category 5 or better Power Envronmental Dimensions 3.15" x 0.87" x 2.20" (80 x 22 x 56 mm) Weight 2.65 oz.
Warranty Information AppendxB AppendxB:Warranty Informaton Limited Warranty Linksys warrants this Linksys hardware product against defects in materials and workmanship under normal use for the Warranty Period, which begins on the date of purchase by the original end-user purchaser and lasts for the period specified below: •...
Página 16
Warranty Information AppendxB CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary by jurisdiction.
Regulatory Information AppendxC AppendxC:Regulatory Informaton FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory Information AppendxC Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: This device may not cause interference and This device must accept any interference, including interference that may cause undesired operation of the device. Avis d’Industry Canada Cet appareil est conforme à...
Página 19
Regulatory Information AppendxC Englsh-EnvronmentalInformatonforCustomersntheEuropean Unon European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Página 20
Regulatory Information AppendxC Dansk(Dansh)-MljønformatonforkunderEU EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol på produktet og/eller emballagen ikke må bortskaffes som usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. Det er dit ansvar at bortskaffe dette og andet elektrisk og elektronisk udstyr via bestemte indsamlingssteder udpeget af staten eller de lokale myndigheder.
Página 21
Regulatory Information AppendxC Español(Spansh)-Informacónmedoambentalparaclentesdela UnónEuropea La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Página 22
Regulatory Information AppendxC Italano (Italan) - Informazon relatve all’ambente per clent resdentnell’UnoneEuropea La direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici.
Página 23
Regulatory Information AppendxC Malt (Maltese) - Informazzjon Ambjental għal Kljent fl-Unjon Ewropea Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih is-simbolu il-prodott u/jew fuq l-ippakkjar ma jistax jintrema ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu jindika li dan il-prodott għandu jintrema separatament minn ma’...
Página 24
Regulatory Information AppendxC Norsk(Norwegan)-MljønformasjonforkunderEU EU-direktiv 2002/96/EF krever at utstyr med følgende symbol avbildet på produktet og/eller pakningen, ikke må kastes sammen med usortert avfall. Symbolet indikerer at dette produktet skal håndteres atskilt fra ordinær avfallsinnsamling for husholdningsavfall. Det er ditt ansvar å kvitte deg med dette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger slik myndighetene eller kommunene bestemmer.
Página 25
Regulatory Information AppendxC Română (Romanan) - Informaţ de medu pentru clenţ dn UnuneaEuropeană Directiva europeană 2002/96/CE impune ca echipamentele care prezintă acest simbol pe produs şi/sau pe ambalajul acestuia să nu fie casate împreună cu gunoiul menajer municipal. Simbolul indică faptul că acest produs trebuie să fie casat separat de gunoiul menajer obişnuit.
Página 26
Regulatory Information AppendxC Suom(Fnnsh)-YmpärstöäkoskevatetojaEU-alueenasakkalle EU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoa ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana. Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään tavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittää tämä...