Bolt Base X4; Wrench; Bolt Cap X4; Tubing Adapter X2 - EVGA HADRON HYDRO Manual De Instrucciones

Ocultar thumbs Ver también para HADRON HYDRO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Intel Socket 2011
STEP 1
Intel LGA 775/2011
Intel LGA 1155/1156/1366
AMD SOCKET AM2/AM2+/AM3
Component Name:
1. Tubing Adapter / Clamp (Option)
8. Thermal Paste
2. Bolt Base
9. Scraper
3. CPU Waterblock
10. AMD Locker
4. Bolt Cap
11. Angle Wrench
5. Washer
12. Hexagon
6. Backplate
13. Screws-B
7. Screws-A
8
▪ Please remove all supporters off the CPU before installing.
▪ Using the 4pcs Screws-A  
on the bottom of M/B together.
Intel LGA 2011 Assembly
If there are no 4 holes on the Intel LGA 2011 CPU socket,
please following the installation of Intel LGA 2011 socket
assembly. Using the 4pcs screws to lock the 4 holes of the
Intel LGA 2011 CPU socket on the M/B entirely.
STEP 2
▪ Before applying thermal paste, clean the surface of the CPU, place sufficient amount of thermal
paste  
onto CPU.
8
▪ Using the scraper  
▪ Remove protectie shield on the bottom before installing the CPU Water-block.
English
English
7
4pcs bolt cap  
4
and 4pcs washers  
, evenly spread thermal paste onto CPU.
9
9
5
to install the backplate  
6

Publicidad

Tabla de contenido
loading

Tabla de contenido