Sauder 418204 Manual De Instrucciones página 12

Step 8
IMPORTANT: This unit must be positioned against a wall.
å
Push the RUBBER SLEEVES (2R) over the remaining METAL PINS (1R). Insert the METAL PINS into the hole locations of
å
your choice in the ENDS (A and B) and UPRIGHT (C). Set the ADJUSTABLE SHELVES (F) onto the METAL PINS.
Center a SCREW COVER (20P) over the head of each visible SCREW in the ENDS (A and B).
å
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BROWN 7/16" LARGE HEAD SCREW (6S)
å
into the top of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (2S) into a stud in your wall.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
25 lbs.
B
25 lbs.
1R
(16 used)
2R
Page 12
No load
50 lbs.
F
F
25 lbs.
C
F
F
25 lbs.
50 lbs.
total
1G
BROWN 7/16" LARGE HEAD SCREW
(1 used into the top of your unit)
A
418204
2S
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
6S
(12 used)
20P
www.sauder.com/services