Sauder 418299 Manual Del Usuario
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Muebles de Interior
  5. 418299
  6. Manual del usuario
Sauder 418299 Manual Del Usuario

Sauder 418299 Manual Del Usuario

Ocultar thumbs
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
sauder.com
Executive Desk
Barrister Lane Collection | Model 418299
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
Go all Wall Street
on everyone.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-34
Français pg 35-39
Español pg 40-44
Lot #375897
08/10/15
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987

Publicidad

Tabla de contenido
loading

Manuales relacionados para Sauder 418299

Resumen de contenidos para Sauder 418299

  • Página 1 Barrister Lane Collection | Model 418299 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987.
  • Página 2 Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 6-34 Hammer Not actual size Français 35-39 Español 40-44 Skip the power trip. Safety 45-46 This time. Warranty Page 2 418299 www.sauder.com/services...

  • Página 3: Part Identifi Cation

    LARGE DRAWER BACK (1) DOOR (1) SMALL DRAWER BRACE (1) D266 PENCIL DRAWER RIGHT SIDE (1) SMALL ADJUSTABLE SHELF (1) D267 PENCIL DRAWER LEFT SIDE (1) LARGE ADJUSTABLE SHELF (1) D474 D716 D266 D267 D473 D707 www.sauder.com/services 418299 Page 3...
  • Página 4 FASTENER - 18 WOOD DOWEL - 8 CONNECTOR - 4 14H HINGE - 2 METAL BRACKET - 12 KNOB - 2 DOOR STOP - 1 RUBBER SLEEVE - 8 METAL PIN - 8 PULL - 2 Page 4 418299 www.sauder.com/services...

  • Página 5: Tabla De Contenido

    BLACK 7/8" LARGE HEAD SCREW - 4 BLACK 1-1/8" MACHINE SCREW - 1 30S BLACK 1-9/16" FLAT HEAD SCREW - 14 GOLD 1" MACHINE SCREW - 4 110S SILVER 1-1/2" MACHINE SCREW - 1 GOLD 7/8" FLAT HEAD SCREW - 4 www.sauder.com/services 418299 Page 5...
  • Página 6 fl oor. Scan this QR code or go to this address: http://qr.sauder.com/?ID=1492 To begin assembly, push a SAUDER TWIST-LOCK® to watch a video on how to assemble your unit. å FASTENER (10F) into the large holes in the RIGHT END (A).
  • Página 7 NOTE: Do not overtighten the SCREWS into the TOP. å MOLDING CONNECTORS (19F) into the notches in the MOLDINGS. Flat end Flat end Flat end Flat end SILVER 1-1/8" FLAT HEAD SCREW (12 used in this step) Do not overtighten the SCREWS (10S). www.sauder.com/services 418299 Page 7...
  • Página 8 Slide the SHELF MOLDING (V) onto the notched edge. Groove Slide the MOLDING until these surface are even Notched edge Slide the END MOLDING (U) onto the notched edge. Slide the END MOLDING (U) onto the notched edge. Page 8 418299 www.sauder.com/services...
  • Página 9 Slide two SHELF MOLDINGS (V) onto the notched edges å of the SHELF (H) and BRACE (J). *U.S. Patent No. 5,499,886 å Slide the SHELF MOLDING (V) onto the notched edge. Groove These edges must be even. www.sauder.com/services 418299 Page 9...
  • Página 10 CABINET LEFT (40CB) to the RIGHT UPRIGHT (C). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3. Roller end GOLD 5/16" FLAT HEAD SCREW (4 used in this step) Roller end Page 10 418299 www.sauder.com/services...
  • Página 11 Step Step 6 Flip the RIGHT UPRIGHT (C) over and lay the LEFT å UPRIGHT (D) next to it with the SAUDER TWIST-LOCK® FASTENERS down. Fasten the EXTENSION BLOCKS (W) to the å UPRIGHTS (C and D). Use four GOLD 7/8" FLAT HEAD SCREWS (110S).
  • Página 12 END and UPRIGHT. Turn a SCREW into this hole. Push the black lever in and pull the SLIDE from the RAIL. Open end GOLD 5/16" FLAT HEAD SCREW (4 used in this step) Open end Page 12 418299 www.sauder.com/services...
  • Página 13 Fasten the RIGHT END (A) to a SMALL TOP MOLDING (T). å Tighten two TWIST-LOCK® FASTENERS. ® How to use the SAUDER TWIST-LOCK FASTENER 1. Insert the dowel end of the FASTENER into the hole of the adjoining part. NOTE: The dowel end of the FASTENER must remain fully inserted in the hole of the adjoining part while locking the FASTENER.
  • Página 14 WOOD DOWELS (15F) into the holes in the END (A). S u r f a c i t h I S T - L O F A S T E N ® E R S The molding should overhang up from the BRACE. Page 14 418299 www.sauder.com/services...
  • Página 15 Fasten the RIGHT UPRIGHT (C) to the TOP å MOLDINGS (S), BACK (I) and BRACE (J). Tighten four TWIST-LOCK® FASTENERS. NOTE: Be sure the WOOD DOWELS insert into the holes å in the RIGHT UPRIGHT (C). Surface with TWIST-LOCK® FASTENERS www.sauder.com/services 418299 Page 15...
  • Página 16 Step 11 Fasten a BOTTOM (F) to the BACK (I), RIGHT END (A), å and RIGHT UPRIGHT (C). Use six BLACK 1-7/8" FLAT HEAD SCREWS (2S). BLACK 1-7/8" FLAT HEAD SCREW (6 used in this step) Page 16 418299 www.sauder.com/services...
  • Página 17 Fasten the MODESTY PANEL (G) to the TOP MOLDING (S). å Tighten two TWIST-LOCK® FASTENERS. Fasten the MODESTY PANEL (G) to the UPRIGHT (C). å Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S). BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) www.sauder.com/services 418299 Page 17...
  • Página 18 Tighten two TWIST-LOCK® FASTENERS. Fasten the LEFT UPRIGHT (D) to the MODESTY PANEL (G). å Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S). BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) Surface with TWIST-LOCK® FASTENERS Page 18 418299 www.sauder.com/services...
  • Página 19 Insert four WOOD DOWELS (15F) into the holes in å the SHELF (H). Fasten the SHELF (H) to the LEFT UPRIGHT (D) inserting the WOOD DOWELS into the holes of the LEFT UPRIGHT. The molding should overhang up from the SHELF. www.sauder.com/services 418299 Page 19...
  • Página 20 Fasten the LEFT END (B) to the BACK (I) and SMALL TOP å MOLDING (T). Tighten four TWIST-LOCK® FASTENERS. NOTE: Be sure the WOOD DOWELS in the SHELF (H) å insert into the holes in the LEFT END (B). Surface with TWIST-LOCK® FASTENERS Page 20 418299 www.sauder.com/services...
  • Página 21 Step 16 Fasten a BOTTOM (F) to the BACK (I), LEFT END (B), and å LEFT UPRIGHT (D). Use six BLACK 1-7/8" FLAT HEAD SCREWS (2S). BLACK 1-7/8" FLAT HEAD SCREW (6 used in this step) www.sauder.com/services 418299 Page 21...
  • Página 22 UPRIGHTS (C and D). Use eight BROWN 1" FLAT Now might be a HEAD SCREWS (12S). good time to refresh your drink. BROWN 1" FLAT HEAD SCREW (8 used in this step) Unfi nished edge Unfi nished edge Page 22 418299 www.sauder.com/services...

  • Página 23: Black 9/16" Large Head Screw

    ENDS, UPRIGHTS and BOTTOMS. Use twelve BLACK 9/16" LARGE HEAD SCREWS (1S). Unfi nished edge (12 used in this step) Unfi nished edge Unfi nished edge Repeat the METAL BRACKET and BASE attachment for this end of the desk. Unfi nished edge www.sauder.com/services 418299 Page 23...

  • Página 24: Black 1/2" Flat Head Screw

    Step Step 19 Fasten two HINGES (14H) to the DOOR (K). Use four å BLACK 1/2" FLAT HEAD SCREWS (11S). BLACK 1/2" FLAT HEAD SCREW (4 used in this step) Page 24 418299 www.sauder.com/services...

  • Página 25: Black 1-1/8" Machine Screw

    Fasten a KNOB (69K) to the DOOR (K). Use the BLACK å 1-1/8" MACHINE SCREW (21S). See the next step for DOOR adjustments. Hinge å BLACK 1-1/8" MACHINE SCREW (1 used in this step) www.sauder.com/services 418299 Page 25...
  • Página 26 Tighten the screws after making adjustments. (vertical adjustment) To adjust the DOORS in or out (depth), loosen the mounting å screw one turn and move the DOORS in or out, as needed. Tighten the mounting screw after making adjustments. Page 26 418299 www.sauder.com/services...
  • Página 27 Fasten the PENCIL DRAWER FRONT (P) to the PENCIL å å the PENCIL DRAWER SIDES (D266 and D267) and DRAWER BOX FRONT (D473). Use four BLACK 7/8" PENCIL DRAWER BRACE (EE). Use three BLACK LARGE HEAD SCREWS. (17S). 1-9/16" FLAT HEAD SCREWS (30S). www.sauder.com/services 418299 Page 27...
  • Página 28 Fasten a KNOB (69K) to the PENCIL DRAWER FRONT (P). å Use the SILVER 1-1/2" MACHINE SCREWS (95S). Roller end SILVER 1-1/2" MACHINE SCREW (1 used in this step) D267 Roller end D266 GOLD 5/16" FLAT HEAD SCREW (4 used in this step) Page 28 418299 www.sauder.com/services...
  • Página 29 NOTE: Be sure the LARGE DRAWER BOTTOM ( D707) inserts into the groove of the LARGE DRAWER BACK (D78). å Repeat this step for the small drawer using parts D20, D21, D74, D716, and O. å www.sauder.com/services 418299 Page 29...

  • Página 30: Gold 1" Machine Screw

    (2 used in this step) Open end Screw head - turn CAM to line up holes in the SLIDES with holes in DRAWER SIDES Open end GOLD 5/16" FLAT HEAD SCREW (4 used in this step) Page 30 418299 www.sauder.com/services...
  • Página 31 FILE RODS (8B), then press this FILE GLIDE over the LARGE LEFT DRAWER SIDE (D29). Insert the FILE RODS into the holes of your choice in the FILE GLIDES, depending on your fi le sizes. www.sauder.com/services 418299 Page 31...
  • Página 32 Screw head - turn CAM to line up holes in the SLIDES with holes in DRAWER SIDES Roller end GOLD 1" MACHINE SCREW GOLD 5/16" FLAT HEAD SCREW (2 used in this step) (4 used in this step) Page 32 418299 www.sauder.com/services...
  • Página 33 (8 used) 70 lbs. 15 lbs. 10 lbs. 25 lbs. 40 lbs. 25 lbs. 25 lbs. Place the roller on the SLIDE 40 lbs. behing the roller on the RAIL. www.sauder.com/services 418299 Page 33...
  • Página 34 #4. The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front. Page 34 418299 www.sauder.com/services...

  • Página 35: Liste De Pièces

    Modèle 418299 Bureau Ministre Utilisez les instructions d’ a ssemblage en français avec les NOUS SOMMES LA POUR VOUS AIDER! schémas étape par étape du manuel d’instruction en anglais. Nous faisons de notre mieux pour nous assurer que votre meuble Chaque étape en français correspond à...
  • Página 36 Retourner le MONTANT DROIT (C) et le placer au côté de le MONTANT ÉTAPE 11 GAUCHE (D) avec les FIXATIONS TWIST-LOCK® SAUDER dirigées vers le bas. Fixer un DESSOUS (F) à l'ARRIÈRE (I), à l’EXTRÉMITÉ DROITE (A) et au Fixer les BLOCS D'EXTENSION (W) aux MONTANTS (C et D). Utiliser MONTANT DROIT (C).
  • Página 37 (D). Utiliser six VIS TÊTE PLATE 48 mm NOIRES (2S). Fixer un BOUTON (69K) à la PORTE (K). Utiliser la VIS À MÉTAUX 28 mm NOIRE (21S). Voir l'étape suivante pour réglages des PORTES. www.sauder.com/services 418299 Page 37...
  • Página 38 DORÉES (3S) à travers les trous nº 2 et nº 4. DOSSIERS sur le CÔTÉ GAUCHE DE GRAND TIROIR (D29). Fixer le BOUTON (69K) au DEVANT DE TIROIR À CRAYONS (P). Utiliser la VIS À MÉTAUX 38 mm ARGENTÉE (95S). Page 38 418299 www.sauder.com/services...
  • Página 39 D'EXTENSION du tiroir sur les GLISSIÈRES D'EXTENSION de l'élément et enfoncer le tiroir dans l'élément jusqu'à ce que le tiroir soit complètement inséré. Le tiroir off rira une certaine résistance jusqu'à ce qu'il soit complètement inséré dans l'élément, il glissera ensuite sans diffi culté. www.sauder.com/services 418299 Page 39...

  • Página 40: Escritorio Ejecutivo

    Modelo 418299 Escritorio Ejecutivo Use estas instrucciones de ensamblaje en español junto con las ESTAMOS AQUI PARA AYUDAR! fi guras paso-a-paso provistas en el folleto inglés. Cada paso Tratamos de asegurar que su mueble llega en condición excelente. en español corresponde al mismo paso en inglés. Se destacan Nuestros representantes de Servicio al Cliente son amables y las fi...
  • Página 41 Para comenzar el ensamblaje, empuje un SUJETADOR TWIST-LOCK® cuatro TORNILLOS DORADOS DE CABEZA PERDIDA de 22 mm (110S). SAUDER (10F) dentro de los agujeros grandes del EXTREMO DERECHO (A). Fije el GABINETE DERECHO (40CA) al BLOQUE DE EXTENSIÓN (W) del...
  • Página 42 (B) y al PARAL IZQUIERDO Fije el VELO DE FONDO (G) al PARAL (C). Utilice dos TORNILLOS (D). Utilice seis TORNILLOS NEGROS DE CABEZA NEGROS DE CABEZA PERDIDA de 48 mm (2S). PERDIDA de 48 mm (2S). Page 42 418299 www.sauder.com/services...
  • Página 43 DE CABEZA PERDIDA de 8 mm (3S) a través de los agujeros No. 2 y No. 4. Fije el POMO (69K) a la CARA DE CAJÓN PARA LÁPICES (P). Utilice el TORNILLO PLATEADO PARA METAL de 38 mm (95S). www.sauder.com/services 418299 Page 43...
  • Página 44 NOTA: Por favor, lea las páginas de atrás del folleto de instrucciones en cuanto a importante información de seguridad. Esto completa el ensamblaje. Limpie con su pulimento para muebles preferido o un paño húmedo. Seque con un paño. Page 44 418299 www.sauder.com/services...
  • Página 45 à Les téléviseurs peuvent être particulièrement un téléviseur. cet eff et. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/services 418299 Page 45...
  • Página 46 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 46 418299 www.sauder.com/services...

  • Página 47: Garantie Limitée De 5 Ans

    à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 48 Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.

Tabla de contenido