Würth WLA08 Manual Del Usuario página 12

Láser automático
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

WLA08-pg1-124
22/05/08
19:53
• Upper Keypad
Detector mode
Remote mode
(red keys)
Choice of
sound level
shot to the left
Choice of
accuracy
shot to the right
On/Off
TROUBLESHOOTING
• Before using a detector, it is very important to set the A510S
in point mode. The receiver cannot detect the beam in
chalk line mode.
• If you cannot pick up the beam with the detector, check how
you are lined up with the laser. One of the head protection sup-
ports on the laser may be blocking the beam; move to the left
or right to receive the beam.
• The metal head protection can be removed from the laser by
pivoting the two security locks. This will not affect the perform-
ance or the water or dust resistance of the laser.
• Lower Keypad
Remote mode
Increase
rotation speed
Decrease
rotation speed
Start/Stop scanning mode
Calibration section of manual explains
function of secondary small symbols.
22
Page 22
Scanning mode
Move square
Increase
scanning angle
Move square
Decrease
scanning angle
and
are used for calibration
or to set manual grade
Scanning mode
Aim scanning left
Aim scanning right
• LCD Display
Low battery
High
Blinking: Normal volume
Near
grade high
Solid: Loud
On-grade
No horn: Mute
Near
Standard
grade low
(Default mode)
Low
• Detection mode
1. Press the On/Off key to turn on the detector.
2. Press the middle key to select the accuracy (deadband).
3. Press the top key to select the sound level.
4. Turn the detection window towards the laser beam, and move
the detector up or down according to the information given on
the LCD display. There are 5 channels of information, or grade
indicators.
A down arrow indicates you must move the detector down to
reach the laser reference; an up arrow, move it up. When a hor-
izontal line appears on the display, the detector is at the same
level as the laser beam.
5. Press the On/Off key to turn the detector off. It will automati-
cally shut off after 10 minutes if not used (and give a warning
beep).
6. Keep the detection window clean, using a soft cloth and glass
cleaner.
• Remote control mode
The detection mode has to be stopped to use the remote control
mode.
B
ATTERY STATUS
S
OUND
A
CCURACY
Fine
23
GB F E D I N FIN

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido