Installation Steps; Care And Cleaning - LUND Interceptor Instrucciones De Instalación

Installation Steps

3
4
Turn out (counter clockwise) both fender bump stops as needed
5

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of
fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
Insert (1) screw with washer and screw until snug. Repeat for remaining (3) fasteners.
Apply a strip of protective film on each of the two (2) TOP corners of the grille.
to clear grille.
®
branded products offered by Lund International, Inc. We take the utmost pride in our products
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
Lund and the Lund
® ®
DO NOT OVER TIGHTEN
6
Lund International
logo are trademarks of Lund International, Inc.
Page 2 of 2
hood shield
washer
screw
Close hood.