Channel Settings; Automatic Channel Scanning - Carbest 49899 Manual De Usuario

ENGLISH
MAIN MENU – CHANNEL SETTINGS
PICTURE
CHANNEL
TIME
Reception source / antenna selection:

Automatic channel scanning:

channel. When the channels are moved, the program number will also be moved (LCN activated). This
setting affects only the DVB-C / T / T2 channel scanning.
SOUND
LOCK
SETUP
Press the p/q button to navigate through the menu. Select
the menu item "Reception source" and press "OK".
Press the p/q buttons to select DVB-T or DVB-C.
Press "OK" to confirm the input.
The "Automatic channel scanning" menu provides you with several
options: Country, Reception type, Search mode, Sort by LCN.
Press t/u to change the various options.
If you select DTV+ATV, the first 50 % of the process will be used for
ATV tuning and the second 50 % for DTV tuning. During the ATV
tuning you can press MENU to skip ATV tuning and start DTV tuning,
or press "Exit" to stop scanning.
Before scanning for channels, deactivate the setting "Sort by
LCN", since this setting allocates a fixed program number for every
During the channel search the number of found channels is displayed
and broken down by the following categories: TV, DTV, Radio and Data.
Press the "MENU" button on your remote control
to enter the menu overview (illustration at left).
Press the p/q/t/u buttons to navigate
through the menu and go to the menu item
"Channel".
Confirm by pressing "OK".
58