MAIN MENU – CHANNEL SETTINGS
Sat configuration:
1. The options for a fixed Sat system for aiming at Astra19.2E or other satellites is explained in the
next steps.
2. The settings for a motorised satellite dish with a DiSEqC motor or a Sat system with a DiSEqC
switch system with multiple LNBs is explained in the next steps.
Step 1 can be carried out by most users without further problems.
Step 2 requires a specialist or an experienced user.
Select "Dish Setup" in the "Channel" menu to access the satellite system settings menu. "Satellite"
must be selected here as the input source (see page 15).
The user interface appears as follows:
1. Satellite list:
The settings in the "Satellite" menu are explained in the following table:
Pressed button
Action
BUTTON p
Navigate up
BUTTON q
Navigate down
BUTTON u
Switch to transponder list
MENU BUTTON
Return to main menu
Close the entire menu and return to the
EXIT BUTTON
TV picture
GREEN BUTTON
Edit satellite
BLUE BUTTON
Change to the "Channel search" menu
61
ENGLISH