Mr Coffee Easy Espresso BVMC-ECMPT Serie Manual Del Usuario página 15

PROBLEMS
Coffee comes
out too quickly.
Coffee is
too weak.
Heating and
Ready Lights
flashing
alternately.
Both Heating
and Ready
Lights are
flashing at the
same time.
Heating and
Ready Lights
are off.
Cannot remove
coffee filter
drawer
POSSIBLE CAUSES
• Ground coffee is too
coarse.
• Not enough coffee in filter
basket.
• Too much water is used.
• Ground coffee is too
coarse.
• Knob turned to Brew or
Steam when unit is plugged
in or before ready light is on.
• Reached maximum brew
time of 2 minutes.
• Reached maximum steam/
froth time of 3 minutes.
• The internal heater is
too hot.
• The unit is not plugged in.
• Unit is in "sleep" mode.
• Tamp gauge is on"
• Knob not at "Stop" position.
• Water Reservoir is
removed.
SOLUTIONS
• Use a finer grind.
• Use more coffee.
• Manually stop the brew
earlier by turning the side
knob to Stop.
• Use a finer grind.
• Turn Knob to
Stop, make sure
ready light is on
before turning to
Brew or Steam.
• Unplug the
unit for
10 minutes.
• Plug in unit.
• Press the Power button on
the front of the unit.
" .
• Wait until tamp gauge is on
"O".
• Turn knob to "Stop".
• Install water reservoir.
13