Problems, Causes & Solutions; Troubleshooting - Mr Coffee Easy Espresso BVMC-ECMPT Serie Manual Del Usuario

PROBLEMS, CAUSES & SOLUTIONS
PROBLEMS
Coffee does
not come out.
No steam is
generated.
Milk is not
foamy after
frothing.
12
POSSIBLE CAUSES
• No water in reservoir.
• Coffee grind is too fine.
• Too much coffee in the
filter.
• Appliance was not turned
on or plugged in.
• Coffee was tamped/
pressed before first use.
• Filter is clogged and needs
to be cleaned.
• Water reservoir is empty.
• Appliance is not turned on.
• Frothing wand is blocked.
• Milk is not cold enough.
• Frothing wand too deep in
milk.
SOLUTIONS
• Add water.
• Grind coffee to espresso
ground.
• Fill filter with less coffee.
• Plug unit into electrical
outlet.
• Do not tamp coffee.
• Clean filter.
• Fill reservoir with correct
amount of water.
• Turn on unit and follow the
operating instructions.
• Following frothing stage,
operate frothing function
for 1-2 seconds to extract
excess milk. Remove the
frothing nozzle cover and
frothing tip and clean with a
needle or toothpick.
• Chill milk and frothing
pitcher prior to frothing.
• Submerge wand ½ - 1" in
milk when frothing.