Selecting The Ventilation Settings - Weinmann MEDUMAT Easy Descripción Del Aparato E Instrucciones

Stenosis
Disconnection
< 2,7 bar O
2

6.2 Selecting the ventilation settings

11
9
10
10
7
11
16
5
30
3
Freq.(min
MV (l/min)
13
14 1, 1
0, 6
0, 3
We recommend selection before switching on, to
prevent unnecessary waste of oxygen.
Respiratory frequency and minute
volume
1. Set the respiratory frequency and the minute
12
14
12
15
13
14
16
Recommended ventilation settings:
Demand-
flow
-1 )
Body weight 10 kg
Respiratory
frequency
Minute
volume
During this test, the four LEDs in alarm panel
flash on and off and a short alarm tone sounds.
If an error is found, all the LEDs in alarm panel
continue flashing and an alarm sounds. If this hap-
pens, MEDUMAT Easy must not be used for venti-
lation.
If audio response is enabled, you will hear the
message "Device malfunction! Administer alter-
native ventilation".
After the self test, the ventilator repeatedly
checks the oxygen cylinder pressure until ade-
quate pressure is detected. Otherwise an alarm is
sounded.
The MEDUMAT Easy will then start to function
with the selected ventilation settings.
volume with regulator knob.
yellow orange
-1
30 min
3 l/min
30 kg 60 kg 80 kg
-1 -1
16 min 11 min 10 min
5 l/min 7 l/min 9 l/min
Using the ventilator
3
3
brown
110 kg
-1 -1
10 min
11 l/min
23
EN