Troubleshooting - COLUMBIA VAC KLC9000 Manual De Instrucciones

TROUBLE SHOOTING
Before contacting professional service, check it first yourself referring to the followings
Problem
The air conditioner does
not function.
The air conditioner
restart frequently
The unit is too noisy
No work of compressor.
Cautions: Switch off the unit and unplug it immediately if anything abnormal
happens. Then contact a qualified electrician.
Above data without advance notice for product improvement
TECHNICAL DATA
Power supply
Power consumption
EER cooling medium
Cooling medium
Noise level
Maximum allowed overpressure during operation:
the suction and pumping part of the cooling system
A/C unit dimensions (L x W x H)
Package dimensions (L x W x H)
Nettto weight
Working temperature cooling mode
Recommended room area
18|EN
Cause
No power supply.
"FL" flashes on the display
screen
Timer-off is running.
In direct sunlight
Windows or doors open,
many people or a heat
source in the room.
Dirty filter
Air inlet or air outlet
blocked
Unit stands uneven.
Self protect of compressor
Solution
Connect to power supply
outlet and switch on
Drain water
You can turn on the unit
three minutes later..
Close curtains.
Close doors and windows,
remove the heat source
Clean or replace the
filter(s).
Remove the blockage
Place on an even, solid
surface (less vibration).
Wait for 3 minute and
restart again after the
descend of temperature
230V 50Hz
1000W
2,63
R410A
62dB(A)
1,0MPa/3,5MPa
41 x 33 x 79 cm
49,4 x 39,4 x 88 cm
25 kg
17-30 C
o
2
~ 15 m