afx light PROPAR6-HEX Manual De Instrucciones página 4

8. KLOCK
9. EDIT
10. CALIB
(Calibrate Color
Temperature/white
balance)
CONTROL PANEL OPERATIONS
1. STATIC (User Manual Static Colors Setting)
This mode allows the user to set the intensity of RED, GREEN, BLUE, WHITE, AMBER, PURPLE (UV) separately to get
endless color mixing from the control board without DMX controller.
Press MENU to select STATIC mode and press ENTER
"RED: xxx" is displayed. Press ENTER again. Use the UP and DOWN buttons to adjust the numeric value (000-255),
press ENTER, "GREE: xxx " is displayed. Repeat the above setting. Do the same for BLUE/WHIT/AMBE/PURP and
STROBE (Value 000-020)
Press MENU to save the setting and go back.
When you enter this mode, the device will be set automatically as the Master unit.
2. COLOR (Solid Colors Setting)
This mode offers 63 solid colors.
Press MENU to select COLOR mode. Press ENTER, then use the UP and DOWN buttons to select the desired solid
colors. Your selection will be saved automatically.
In this mode, the device will be set automatically as the Master unit
Mode: Value:
Color 1
Color 2
Color 3
COLOR Color 4
Color 5
Color 6
Color 7
©Copyright LOTRONIC 2017
RGB TO W
SlaveNum
ON / OFF
CUSTOM01
CUSTOM02
CUSTOM03
........
CUSTOM10
WHITE 1
WHITE 2
....
WHITE 11
RGB TO W
Function:
Red
Green
Blue
White
Amber
Purple
Red + Green
ON / OFF
Slave 00
Slave 01
..........
Slave 15
SCENE 01
SCENE 02
SCENE 03
.........
SCENE 30
RED: 000~255
GREE 000~255
BLUE: 000~255
WHIT 000~255
AMBE: 000~255
PURP: 000~255
PROPAR-HEX
RED: 000~255
GREE:000~255
BLUE: 0~255
WHIT 0~255
AMBE 0~255
PURP 000~255
STRB 000~020
TIME 000~255
FADE 000~255
4