afx light PROPAR6-HEX Manual De Instrucciones página 6

Color 52
Color 53
Color 54
Color 55
Color 56
Color 57
Color 58
Color 59
Color 60
Color 61
Color 62
Color 63
3. AUTO (Auto Programs Setting)
This mode runs the built-in automatic programs and the user self-edited programs.
Press MENU to select AUTO mode and press ENTER.
Use the UP and DOWN buttons to select the built-in automatic programs or the user self-edited programs.
Built-in auto: AUTO 1 ~ AUT 10;
Built-in auto program speed: S 0 ~ S 255 (Slow – Fast)
User self-edited programs: CUSTOM01 ~ CUSTOM10
In this mode, the device will be set automatically as the Master unit.
4. ADDRES (DMX Address Setting)
Press MENU to select the ADDRES mode, press ENTER. Then use UP and DOWN buttons to set the desired DMX
address (ADDR 001 - 512)
5. MODE (Control Mode Setting)
Use this mode to set the device to DMX controller mode or to SLAVE mode.
Press MENU to select MODE, press ENTER. Then use the UP and DOWN buttons to select DMX for the unit to be
controlled by a DMX-512 signal or SLAVE to be controlled by the master unit.
PERSON (Customized DMX channel setting)
There are 4 DMX channel modes to be selected.
Press MENU to select the PERSON mode, press ENTER. Then use the UP and DOWN buttons to set the DMX channel
modes.
12 Ch
8 Ch
6 Ch
HSV (H = Hue, S = Saturation, V = Brightness)
Please refer to DMX VALUES chart for the channels detail.
6. SET (Unit local Setting)
Press MENU to select SET, press ENTER. Use UP and DOWN to select the desired setting: UPLOAD, RESET, DIMMER,
RGB TO W (white balance setting).
UPLOAD
©Copyright LOTRONIC 2017
Green + Blue + White + Amber
Green + Blue + White + Purple
Green + Blue + Amber + Purple
Green + White + Amber + Purple
Blue + White + Amber + Purple
Red + Green + Blue + White + Amber
Red + Green + Blue + White + Purple
Red + Green + Blue + Amber + Purple
Red + Green + White + Amber + Purple
Red + Blue + White + Amber + Purple
Green + Blue + White + Amber + Purple
Red + Green + Blue + White + Amber + Purple
PROPAR-HEX 6