Network Setting - ViewSonic SD-A225 Guia De Inicio Rapido

Home Screen
Desktop area
Tool icons
Shows the list of all
All applications
applications.
Shows menu of the current
Menu
application.
Depending on the screen shown, the content displayed in tool icons may vary.
Status display
I. Network Setting
Connecting to Wireless LAN
1) Tap "All applications" – "Settings".
2) Turn "Wi-Fi" to ON by dragging "OFF" to the right.
3) When Wi-Fi is turned on, a list of all available wireless LAN access points will be shown on the right
side of the screen. Tap the desired Wireless LAN access point for connection.
4) If a password is required, enter it and tap "Connect" to connect to the wireless LAN.
Connecting to RJ45
Simply plug in your Ethernet cable to the RJ45 port to connect to a LAN. No set-up or configuration is
required.
J. Formatting
Resetting Your Smart Display
Formatting will delete all of your data created and added after purchase (including system and application
settings, downloaded applications, etc.)
1) Tap "All applications" – "Settings".
2) Tap "Back up & reset".
3) Tap "Factory data reset".
4) Confirm all onscreen instructions and tap "reset".
5) Again, confirm all onscreen instructions and tap "Delete All". Formatting will begin shortly.
System will reboot several times during formatting.
Operation buttons
Back button
Home button
Recently used
applications
OSD
Screenshot
button
6
Returns to previous screen.
Returns to Home screen.
Shows the list of recently used
applications.
Shows the display's settings
menu.
Tap this button to capture an
image of your screen.